Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Facebook Icon Instagram Icon Pinterest Icon Twitter Icon Translation missing: en.general.icons.vimeo Icon Youtube Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video
Victoria Blazer Sewalong #2: Assembling the shell

First and foremost - a gigantic, enormous, astronomical THANK YOU to youz lot for all the lovely messages, comments, tweets, everything since the release of our brand new pattern, the Anna Dress. We had a sneaking suspicion she'd be well received (we've been swooning hard ever since our first sample), but as usual, you guys have gone and overwhelmed us with all the love, once again. Thank you. We really, really appreciate it.

god-thank-you-cat1

But for now, back to the matter at hand: the Victoria Blazer Sewalong! Now things are really getting moving... And we'll have something resembling the bulk of your blazer by the end of this post, lining and all! Today we'll be covering:

  • Stay stitching
  • Joining the front and back pieces
  • Creating the darts
  • Closing the side seams (variation 2 - cropped - ONLY)
  • Repeating the above steps for the lining (all variations)

Stay Stitching:

So what is stay stitching? It's basically just a line of wide machine stitching along the raw edge (about 10mm in from the edge) of your fabric, usually along a curve that you don't want to stretch or 'give' before you get to seaming it. Now, we'll be the first to admit that we rarely actually do this... But if you're using fabric with a relatively loose weave, or any kind of stretch, then stay stitching will only make your life easier later on. So do it. And we'll start practicing what we preach!

All you want to do is select the widest straight stitch your machine has to offer, and sew a line of stitching 10mm in from the raw edges of your sleeve heads and the centre front opening edges like this:

Victoria Blazer Sewalong - By Hand London

Victoria Blazer Sewalong - By Hand London

Joining it all together:

The first step in assembling the blazer's shell (and by 'shell', all we mean is the outside, with the lining being the inside) is joining the two centre front pieces at the centre back neckline. Using the usual 5/8", or 15mm, seam allowance and with right sides together, seam those two short little ends together:

Victoria Blazer Sewalong - By Hand London

And press that seam open:

Victoria Blazer Sewalong - By Hand London

At this point, we recommend finishing off these raw edges of excess seam allowance. You can do this on an overlocker/serger, or if you don't have one of those (seriously good investment though girls - try smiling sweetly at your lover/folks/friends...!) you can always secure the raw edge by going over it with a zigzag stitch or some machines even have a mock-overlock stitch. Failing that, you can never go wrong with a good ole pair of pinking shears (zigzag scissors) to trim away the excess.

Shoulder seams:

Pretty standard situation here - simply joining the front to back (right sides together!) at the shoulder seams, only for this blazer it's important to remember that we've included a little excess ease on the back piece.

Victoria Blazer Sewalong - By Hand London

Victoria Blazer Sewalong - By Hand London

Pin the front and back pieces together at the notches on the shoulders and just gently stretch out the slightly shorter front shoulder as you stitch. Press the shoulder seams open and finish as you did before.

Victoria Blazer Sewalong - By Hand London

Closing that odd looking dart:

At first glance, you'd be forgiven for feeling slightly daunted by that front dart/neckline seam all-in-one going on there... But have no fear ladies! It's surprising easy, and amazingly slick.

Begin by laying out your blazer, right side facing down. Make extra sure that you while you were cutting out your fabric, you marked the dart's starting point on both centre front pieces:

Victoria Blazer Sewalong #2: Assembling the shell - By Hand London

With right sides together, pin the neckline matching the notch at centre back of the back piece to the centre back neckline seam, matching notches on the front neckline pieces to the shoulder seams, and continue to pin down to the start of each dart.

Victoria Blazer Sewalong #2: Assembling the shell - By Hand London

Start your stitching from the beginning of the dart on the centre front piece shown on the left hand side in the image above. When the dart stops being a fold and hits the raw edge of the neckline, you should be stitching with your usual 5/8", or 15mm seam allowance. Ease around the curve at centre back, and continue until you've reached the end of the dart on the other side.

Give this seam a good press towards the side seams, and from the right side you should now have something looking a bit like this:

Victoria Blazer Sewalong - By Hand London

*If you are making the Main Variation 1 with side seam pockets, you can now repeat the above and assemble your lining - we'll be covering the pockets early next week*

Side seams - Cropped Variation 2 ONLY & all linings:

Last on our agenda for today folks - closing the side seams. This is applicable to all linings, and for the cropped variation 2 shells ONLY. Those of you making the main or sleeveless variations, basically anything with pockets, can skip this part for your blazer shells and get started on your linings (see below).

With right sides together, pin and stitch down the side seams, starting at the underarm. Press this seam open and finish:

Victoria Blazer Sewalong - By Hand London

Lining - ALL VARIATIONS:

Now all you gotta do is scroll back to the top of this post and repeat everything for your lining pieces... And you're done for the day!

Victoria Blazer Sewalong - By Hand London

We'll be seeing you again early next week when we'll be setting in the pockets and prepping the collar and lapels... In the meantime, have a wonderful wonderful weekend guys, and don't do anything we wouldn't do...!

Comments on this post (5)

  • Jul 19, 2013

    Not to worry – this is pretty common for lightweight fabrics, and in fact, a good way to gently gather! The main aim of stay stitching is to avoid the fabric stretching or giving, so if it has puckered a bit that’s absolutely fine. Just remember to remove those stitches just before attaching the collar and lapels and before joining the sleeve to the armhole. :)

    — byhandlondon

  • Sep 15, 2013

    You neglected to mention that stay stitching should be done from the outer edge of your garment piece in towards the center. This further minimizes any stretching or distortion of a garment piece that is on the bias. On the sleeve head, for example, I would start stitching along one edge going inward and stop at the center without backstitching. I cut my threads, then flip my piece over to the opposite side (right or wrong side of the fabric as the case may be) and repeat the process. Now I have two lines of stitching that meet in the middle. It really does make a difference!

    — A Seamstress

  • Sep 16, 2013

    Great tip – and one that we have yet to try out! Thanks for this :)

    — byhandlondon

  • Jul 15, 2013

    Very excited by how it’s looking already but slightly anxious about the cropped length on the ahem larger lady. Just concerned that it’s going to make me look even wider than I already do, but I am putting my trust in you!

    — Jo

  • Jul 16, 2013

    Here’s a basic one for you (sorry I’ve only worked in cotton before!)…. I’ve got a light crepe fabric and when I sew the stay stitching it gathers/puckers it. What am I doing wrong? Stitch length 5mm – is that too long? Tried with a normal foot and a walking foot no difference :-(

    — loup

Leave a comment