Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Facebook Icon Instagram Icon Pinterest Icon Twitter Icon translation missing: en.general.icons.vimeo Icon Youtube Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video
Rumana Coat Sewalong - Inserting the lining and the finish line!

This is it, sewalongers, the final step in the making of your Rumana Coat! We sincerely hope you have enjoyed the process, and feel proud and satisfied for having tackled such a meaty project. And we hope that you enjoy wearing your Rumana for years to come! But before we start counting our chickens, let's finish this baby off...

You can find all the posts in the Rumana Coat Sewalong here

So far, you should have your coat shell assembled, and your lining assembled. All that's left to do is join the two together. But before we dive straight in, we need to prep the hem and sleeve cuffs to make the lining insertion process smoother.

We will be using the bagging method to join the lining to the shell. This means that we'll be sewing the lining to the coat at the raw edges of the facing, along the hem, and around the sleeve cuffs, leaving a small opening at the vent through which to turn the whole coat out to the right side. This method ensures a neat and long lasting finish with minimal hand sewing... but before you shout Hooray! let me just burst your bubble a little bit and remind you that minimal hand sewing doesn't mean no hand sewing...! We will still need to catch stitch the cuffs and hem in place (to keep the lining tucked out of view), and slip stitch the opening at the vent closed too. I'm personally quite partial to a bit of hand sewing at the end of a project - I like the way it forces me to slow down and not rush the final steps. 

To prep the hem and sleeves for catch stitching, we need to press them in by 4cm. You don't need to get out your tape measure for this; simply fold at the notch which indicates the halfway point of the interfacing.

And press the hem up in the same way:

If you'd like to add a label, or hanging loop to the back neck facing, now's the time, before the lining goes in.

We LOVE our new BHL sew in labels from Dutch Label Shop!

Inserting the lining

With your coat shell and lining both inside out, and right side of the lining facing the right side of the facing, pin the lining to the coat's facing all along the neckline and down each side matching notches.

Stitch with 3/8" or 10mm seam allowance and start your sewing at the centre back neckline and sew down each side down to the hem one by one so as to prevent the fabrics from shifting and travelling as you sew.

Don't turn your coat out to the right side yet!

To sew the hem, lay out your coat, lining facing you, so that you can see the hem clearly. On the lefthand side of the vent, you'll see that the hemline of the lining appears too short to fit the hemline of the coat. This is normal! What you need to do is pull the lining over to the vent, and pin the lining to the shell at the vertical edge of the vent.

Stitch that vertical vent line from the hem up to the top with 3/8" or 10mm seam allowance.

Now lay out your coat again as before. With that vertical vent seam sewn, you'll see that you can now pin that lefthand hemline smoothly thanks to the couple of inches of that vent that will now fold back to the inside of the coat.

Pin the coat shell to the facing at the hem, continuing to pin the lining to the shell along the rest of the hemline. You may have wondered why the lining pieces curve up slightly at the hem - this is so that the lining stays tucked out of the way and does not sag down beyond the hem once sewn. 

Pin the hemline of the righthand side in the same way, although this one you'll see fits together perfectly from the centre front to the vent.

Stitch the hem with 5/8" or 15mm seam allowance. For the righthand side, stitch until you get to the vent, at which point pivot and sew up the last remaining vertical vent edge for about an inch. The rest needs to stay open so that you can turn the coat out to the right side.

Clip corners to reduce bulk when we come to turning the coat out to the right side:

Don't turn your coat out to the right side yet!

Now we need to sew the lining to the shell at the sleeves.

This part is quite tricky to explain, but actually very straightforward when you've done it once. With everything still inside out, you want to take one main fabric sleeve, and its corresponding lining fabric sleeve, and bring them together so they meet at the cuffs - it kind of looks like they're hugging the side of the coat...

With your main fabric cuff pressed in, you'll see that you can slip the cuff lining over the pressed cuff. Being very careful not to twist either sleeve, pin the cuffs together, matching seams.

Getting the pinned cuff through the sewing machine is a little fiddly, so go slow and take care not to catch the underneath as you sew!

Repeat for the sleeve on the other side.

One final thing to do before we turn our coats out to the right side!

In order to keep the cuffs and hem up in place, we need to catchstitch them at the pressed folds while we still have access to the inside of the coat.

Thread up a hand sewing needle and catchstitch the folded hem and cuffs into place, making sure that the lining is not caught in your stitches. If you need help with the catchstitch, please head to this post

Ok, now we can turn the coat out to the right side!! And if you haven't listened to the episode of the Love to Sew podcast where Jasika refers to turning out a bagged out coat as "birthing", do that now!!

Carefully birth your coat through the opening at the vent. Push the sleeves out so that the lining slips inside them. Give the whole coat a seriously good press, and as you do, also press in that vent opening and pin together, ready to close by hand.

This will be sealed with a blind slip stitch.

Your finished coat, from the inside, should be looking more or less something like this....

If you are adding a button (or more) to your coat, that will be the finishing touch. Using the suggested button placement indicators on the pattern, try on your coat and decide if that placement is right for you; if not, play around with button position on yourself and pop a pin in at the point(s) you feel comfortable with a fastening.

Use the buttonhole feature on your machine to create horizontal buttonhole(s) on the righthand side of your coat (as if you're wearing it) and hand sew your buttons on the other side. If you're feeling particularly patient and wanting to achieve a more couture finish, you could also consider making a hand worked buttonhole (we love this tutorial at By Gum By Golly) or bound buttonholes (check this tutorial by The Little Tailoress).

For this coat, I wanted something resembling more of a snuggly trench coat, so I left out the buttons and made a long waistband to tie around my waist instead. I also slightly exaggerated the width of the coat front pieces (and corresponding front facing pieces) to allow the coat to wrap one side over the other more - we will be putting together another post soon outlining some simple pattern hacks you can do to make myriad coats and jackets from this pattern.

That's it guys! One Rumana Coat done and dusted. We hope this sewalong has helped clarify the trickier aspects of sewing Rumana, and that you enjoy wearing your new coats as much as we do!

Please feel free to tag and share your Rumana Coats with us and the world on social media using the hashtags #RumanaCoat, #BHLRumana and #byhandlondon. We can't shout it loudly enough how much seeing your creations using our patterns is what makes our world go around! 

Comments on this post (0)

Leave a comment