*Sewalong bonus post!*
Today sewalongers, we have for you a bonus post – how to add a lining to your Charlotte skirt!
Before we get started, here’s a reminder of all the Charlotte skirt sewalong posts so far:
Our skirts are looking pretty damn sexy so far, no? But here at By Hand HQ, we think our clothes should feel sexy too, and adding a slinky lining to your Charlotte skirts will do just that: no yanking down your hemline to stop it riding up your tights, no itchy wool irritating your bare legs. Add to that a super crispy and profesh finish as the lining will hide all your seams, darts and straggly threads. And you know how much we like a profesh finish! Here’s how it’s done…
As we mentioned in our last post, to make the lining you will need:
Just as we did in sewalong #2, cut, mark and assemble your skirt front and back pieces in your lining fabric. Omit the zipper insertion, but close the back seam up to the point where the zipper ends. Press and finish your seams and darts just as we did before. When pressing the back seam, make sure you continue pressing the seam allowance at the zipper opening. We’ll need a crisp fold to make blind stitching it easier…
Turn the lining inside out and slip it inside the main skirt (the skirt’s shell). The two wrong sides should be facing each other hiding all seams, leaving only the right sides showing. Match up the side seams, darts and centre back and pin the lining to the shell all along the waistline. Machine stitch into place, leaving just 3/8″ seam allowance as opposed to the usual 5/8″ so as not to leave unnecessarily visible stitches once the waistband has been attached.
Now, and for the cleanest of finishes, we’re going to blind stitch the opening at the centre back of the lining to the zipper. Pin the back opening of the lining to the zipper. Thread up your hand sewing needle. Starting at the top of the (open) zipper, insert your needle into the fabric of the zipper, picking up just a few strands and coming right out again (shown in fig.1 below). Don’t get too close to the zipper teeth, or you might have a problem getting your zipper back up.
Now insert your needle into the lining fabric directly above your current stitch. Using the pressed fold as a guide, slide your needle along a centimetre or so inside the fold and then come out again (see fig.2 below). Repeat fig.1 directly below the point your needle just came out. And so on. Continue this blind stitching down to the point at which the zipper ends, and back up the other side. Securely knot off your stitching and make sure that the zipper still goes up and down smoothly.
All done and slinkified! Now all we have left to do is attach our waistbands and hem our skirts! If you have some time this weekend and fancy skipping ahead, you can refer to our tutorial, The Perfect Waistband.
Finished already?? You can start emailing us pictures of your Charlotte skirts for our round-up Sew & Tell post to: firstname.lastname@example.org – please send us high-res images, links to your blog or other social media, plus anything else you’d like to add – maybe your highlights of the sewalong, favourite details on your skirt, ways in which you might do it differently next time round. We’ll do our very best to include everyone.
That’s it from us for now – have a wonderful weekend folks!